Fire-Lite MS-9200UDLS Manual page 110

Programming

ANN-I/O Point Option
If Point is selected as the module option, the first ten LEDs on the first ANN-I/O module will
display the system status information. The remaining 30 LEDs on the first module and 40 LEDs on
each additional module will display the active/alarm status of each point in the Point Range
programmed for that particular module. The points that will be annunciated on a particular ANN-
I/O module depend on the programming options selected as far as the device type (detector or
module) to be annunciated. The LED assignments for each ANN-I/O module will be as follows.
110
Point Range
Module LED
1-30
1 AC Fault
2 Fire Alarm
3 Supervisory
4 Trouble
5 Alarm Silenced
6 Earth Fault
7 Battery Fault
8 Charger Fault
9 NAC Fault
10 Disabled
11 Point 01
12 Point 02
13 Point 03
14 Point 04
15 Point 05
16 Point 06
17 Point 07
18 Point 08
19 Point 09
20 Point 10
21 Point 11
22 Point 12
23 Point 13
24 Point 14
25 Point 15
26 Point 16
27 Point 17
28 Point 18
29 Point 19
30 Point 20
31 Point 21
32 Point 22
33 Point 23
34 Point 24
35 Point 25
36 Point 26
37 Point 27
38 Point 28
39 Point 29
40 Point 30
Point Range Point Range
31-70
Point 31 Point 71
Point 32 Point 72
Point 33 Point 73
Point 34 Point 74
Point 35 Point 75
Point 36 Point 76
Point 37 Point 77
Point 38 Point 78
Point 39 Point 79
Point 40 Point 80
Point 41 Point 81
Point 42 Point 82
Point 43 Point 83
Point 44 Point 84
Point 45 Point 85
Point 46 Point 86
Point 47 Point 87
Point 48 Point 88
Point 49 Point 89
Point 50 Point 90
Point 51 Point 91
Point 52 Point 92
Point 53 Point 93
Point 54 Point 94
Point 55 Point 95
Point 56 Point 96
Point 57 Point 97
Point 58 Point 98
Point 59 Point 99
Point 60 Not Used
Point 61 Not Used
Point 62 Not Used
Point 63 Not Used
Point 64 Not Used
Point 65 Not Used
Point 66 Not Used
Point 67 Not Used
Point 68 Not Used
Point 69 Not Used
Point 70 Not Used
MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Master Programming Level
71-99