Air Cleaner/Wire Harness/Radiator Hose; Cables/Brake Cylinder - Kubota RTV 900 Workshop Manual

RTV900, WSM
Air Cleaner, Wire Harness, Radiator Hose (Upper), Cables and
Brake Cylinder
1. Remove the air cleaner body and intake hose as a unit.
2. Disconnect the wire harness (1) from engine, alternator and
stator motor.
3. Remove the ground cable (5) and positive cable (4).
4. Disconnect the parking brake cables (8), four wheel drive cable
(10), select cable and shift cable (2).
5. Remove the speed control pedal cable (9).
6. Remove the clevis pin and the brake cylinder (7) with brake rod.
7. Disconnect the differential lock cable (6).
8. Remove the radiator upper hose (3).
(When reassembling)
• Adjust the length of the shift cable and select cable. (See page
2-S14.)
• Adjust the length of the speed control pedal cable. (See page 2-
S13.)
• Adjust the length of the parking brake cable. (See page 2-S16.)
• Adjust the length of the 4WD shift cable. (See page 2-S15.)
(1) Wire Harness
(2) Shift Cable and Select Cable
(3) Radiator Upper Hose
(4) Positive Cable
(5) Ground Cable
9-S5
NEW TRANSMISSION
(6) Differential Lock Cable
(7) Brake Cylinder
(8) Parking Brake Cable
(9) Speed Control Pedal
(10) 4WD Cable
W1013611
KiSC issued 04, 2006 A