2-14. PRESSURE
REGULATION/
EXHAUST (Continued)
2-40
Lid Liner
1. Remove the four lid liner screws.
2. Use a thin blade screwdriver to pry lid liner from the cover.
3. Clean the liner and the inside of the cover. Replace the liner
and screws.
Reversing the
Lid Gasket
The gray rubber gasket surrounding the inside of lid is designed
to be reversed. Henny Penny recommends that this be done on a
quarterly basis.
Purpose
Because of heat expansion and the pressure used for the cooking
process, the gasket is constantly under extreme stress. Reversing
the lid gasket on a quarterly basis will help to assure that the fryer
will not lose pressure through leakage.
Model 500/600
305