1-5. DIAGNOSTIC MODE
DETAILS (Continued)
1-6. INFORMATION MODE
DETAILS
1-32
The fi nal item in D 10 identifi es if any changes have been made to
the heat control settings. These settings affect the fryer's heating
algorithms, and include the PC factors, rate-of-rise compensations,
and heat pulse cycle time, etc.
"10: ALL HC ITEMS"
"10: MATCH"
"10: ORIG. VALUES"
This historic information in this mode can be recorded and used for
operational and technical help.
Press
and
shows in the display, followed by
Press and hold
or after 2 minutes, controls automatically exit back to normal
operation.
1. E-LOG
(error code log)
Press
and
"1A. (date & time) *NOW*
is the present date and time.
Press
and if a error was recorded,
code infromation)"
shows in display. This is the latest error code
that the controls recorded.
Press
and the next latest error code information can be seen. Up
to 10 error codes (1B to 1K) can be stored in the E-LOG section.
Press
to continue to P-LOG.
2. P-LOG
(power-up log)
Press
and
"2A. (date & time) *NOW*
is the present date and time.
Press
and latest power-up is shown,
UP".
"10: 3 HC ITEMS"
"10: DO NOT MATCH"
"10: ORIG. VALUES"
at the same time and
"*INFO MODE*"
"1.
E-LOG".
to exit Information Mode at any time,
shows in display. This
"1B. (date, time, and error
shows in display. This
"2B. (date, time,) PWR-
Model 500/600
305