Stand Mode Indication - Datalogic Gryphon I GM440 Series Product Reference Manual

Enter/Exit Programming Mode

Stand Mode Indication

This operation is useful for indicating when the reader is in Stand Mode. If
enabled, the blue indicator will blink when Stand Mode scanning is active. If
reader detects motion (or removed from base station for cordless models)
and switches out of Stand Mode into Triggered Mode, blinking will stop until
Stand Mode is active again.
$CSMFL00(CR)
DEFAULT
Stand Mode Indication = Disable
$CSMFL01(CR)
Stand Mode Indication = Enable
102 Gryphon™ I GD44XX/GBT4400/GM440X