USER MANUAL
Peplink Balance Series
18 Captive Portal
The captive portal serves as gateway that clients have to pass if they wish to access the internet using
your router. To configure, navigate to
Enable
Hostname
Access
Mode
RADIUS
Server
http://www.peplink.com
Network>Captive Portal
Captive Portal Settings
Check Enable and then, optionally, select the LANs/VLANs that will use the captive
portal.
To customize the portal's form submission and redirection URL, enter a new URL in this
field. To reset the URL to factory settings, click Default.
Click Open Access to allow clients to freely access your router. Click User
Authentication to force your clients to authenticate before accessing your router.
This authenticates your clients through a RADIUS server. After selecting this option, you
will see the following fields:
Fill in the necessary information to complete your connection to the server and enable
authentication.
-159 / 258 -
.
Copyright © 2015 Peplink