Installation; Preparation; Constructing The Network - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series
7

Installation

The following section details connecting the Peplink Balance to your network:
7.1

Preparation

Before installingyour Peplink Balance, please prepare the following:

At least one Internet/WAN access account

For each network connection, one 10/100BaseT UTP cable with RJ45 connector,
or one 1000BaseT Cat5E UTP cable for the Gigabit port on the Balance
580/710/1350/2500, or one USB modem for the USB WAN port on the Balance
305/380/580/710/1350/2500/MediaFast

A computer with the TCP/IP network protocol and a web browser
installed.Supported browsers include Microsoft Internet Explorer 8.0 andabove,
MozillaFirefox 10.0andabove, Apple Safari 5.1andabove, and Google Chrome
18andabove.
7.2

Constructing the Network

At the high level, construct the network according to the following steps:
1. With anEthernetcable, connect a computer to one of the LAN ports on the
Peplink Balance. For the Peplink Balance 20, 30, 30 LTE, 50, 210, and 310,
repeat with different cables for up to 4computers to be connected.
2. With another Ethernetcable, connect the WAN/broadband modem to one of the
WAN ports on the Peplink Balance. Repeat using different cables to connect
from 2 to13WAN/broadband connections(Peplink Balance 20, 30, 30 LTE,
50,210, 310, 305,380, 580,710, 1350,2500, and MediaFast) or connect a USB
modem to the USB WAN port (Peplink Balance 20, 30, 30 LTE, 50, 380, 580,
710, 1350, 2500, and MediaFast).
3. For the PeplinkBalance 20, 30, 30 LTE, 50, 210, and 310, connect the provided
power adapter to the power connector on the Peplink Balance, and thenplug the
power adapter into a power outlet. Forthe Peplink Balance 305,380, 580, 710,
1350,2500, and MediaFast, connect the provided power cord to the AC power
connector on the Peplink Balance, and then plug the power cord into a power
outlet.
http://www.peplink.com -59 / 258 - Copyright © 2015 Peplink