USER MANUAL
Peplink Balance Series
15.1 Outbound Policy
There are three main selections for the outbound traffic policy:
High Application Compatibility
Normal Application Compatibility
Custom
High
Outbound traffic from a source LAN device is routed through the same WAN connection
Application
regardless of the destination Internet IP address and protocol. This option provides the
Compatibility
highest application compatibility.
Outbound traffic from a source LAN device to the same destination Internet IP address will
Normal
be routed through the same WAN connection persistently,regardless of protocol. This
Application
option provides high compatibility to most applications, and users still benefit from WAN link
Compatibility
load balancing when multiple Internet servers are accessed.
Outbound traffic behavior can be managed by defining rules in a custom rule table. A
Custom
default rule can be defined for connections that cannot be matched with any of the rules.
The default policy is Normal Application Compatibility.
Want to know more about creating outbound rules? Visit our
http://www.peplink.com
Outbound Policy Settings
Tip
YouTube Channel
http://youtu.be/rKH4AS_bQnE
-120 / 258 -
for a video tutorial!
Copyright © 2015 Peplink