Using A Usb Storage Device To Save/Load Data; Saving The M7Cl's Internal Data; On A Usb Storage Device - Yamaha M7CL Owner's Manual

Using a USB storage device to save/load data

Using a USB storage device to save/load data
This section explains how you can connect a commercially-available USB storage device to the
USB connector located at the right side of the display, and use it to save or load internal settings
of the M7CL or user authentication keys.
NOTE
• The M7CL can handle FAT32, FAT16, or FAT12 file systems, but if you format the storage device from the
M7CL it will be formatted as FAT16. Long file names are not supported.
• Operation is guaranteed only for USB flash memory that is no larger than 2 GB.
CAUTION
• An ACCESS indicator is shown in the function access area while data is being accessed (saved, loaded,
or deleted). Do not disconnect the USB connector or power-off the M7CL while this indicator is shown.
Doing so may damage the data on the storage media.

Saving the M7CL's internal data

on a USB storage device

Here's how all of the M7CL's internal data (except for the
data included in a user authentication key) can be saved on
the USB storage device as a file. The saved file will have
an extension of ".M7C".
1
In the function access area, press the
SETUP button to access the SETUP screen.
2
Press the SAVE/LOAD button to access the
SAVE/LOAD popup window.
202
M7CL Owner's Manual
SAVE/LOAD button
3
If necessary, press the directory icon and
change the directory.
To move to the next higher level, press the arrow but-
ton in the PATH field.
4
Press the SAVE button.
A keyboard window will appear, allowing you to enter
a file name and comment.
5
Enter a file name of up to eight characters,
a comment of up to 32 characters, and
press the SAVE button.
When the file has finished being saved, the popup
window showing the save progress indication and the
type of data will close.