If An Input Channel Is Selected; If A Mix Channel Is Selected; If A Matrix Channel Is Selected - Yamaha M7CL Owner's Manual

G If an input channel is selected
Use the buttons in the lower part of the SAFE PARAME-
TER SELECT field (except for the "ALL" button) to
select the parameters that will be subject to Recall Safe
(multiple selections are allowed). If you want all parame-
ters to be subject to Recall Safe, turn on the ALL button
(this is the default setting).
These buttons correspond to the following parameters.
Button name Corresponding parameters
ALL All parameters
HA Head amp settings (including external HA)
EQ EQ settings (including ATT/HPF)
DYNA 1 Dynamics 1 settings
DYNA 2 Dynamics 2 settings
MIX ON On/off status of signals sent to MIX buses
MIX SEND Send levels of signals sent to MIX buses
MATRIX ON On/off status of signals sent to MATRIX buses
MATRIX SEND Send levels of signals sent to MATRIX buses
FADER Fader positions
CH ON On/off status of [ON] keys
NOTE
• If the ALL button is on, all other buttons in the lower part of
the SAFE PARAMETER SELECT field will be turned off.
G If a STEREO/MONO channel is selected
With the exception of the types of button that are dis-
played, this is the same as for an input channel. These but-
tons correspond to the following parameters.
Button name Corresponding parameters
ALL All parameters
EQ EQ settings (including ATT)
DYNA 1 Dynamics 1 settings
MATRIX ON On/off status of signals sent to MATRIX buses
MATRIX SEND Send levels of signals sent to MATRIX buses
FADER Fader positions
CH ON On/off status of [ON] keys
NOTE
• If the ALL button is on, all other buttons in the lower part of
the SAFE PARAMETER SELECT field will be turned off.
Using the Recall Safe function
G If a MIX channel is selected
Use the buttons in the lower part of the SAFE PARAME-
TER SELECT field (except for the "ALL" button) to
select the parameters that will be subject to Recall Safe
(multiple selections are allowed).
In addition, you can use the WITH MIX SEND button dis-
played in the lower-left part of the field to enable Recall
Safe for the on/off status and send level of the signals sent
from input channels to MIX buses.
If you want all parameters shown in the lower part of the
field to be subject to Recall Safe, turn on the ALL button
(this is the default setting).
These buttons correspond to the following parameters.
Button name Corresponding parameters
ALL All parameters (except for WITH MIX SEND)
EQ EQ settings (including ATT)
DYNA 1 Dynamics 1 settings
MATRIX ON On/off status of signals sent to MATRIX buses
MATRIX SEND Send levels of signals sent to MATRIX buses
FADER Fader positions
CH ON On/off status of [ON] keys
On/off status and send level of signals sent
WITH MIX SEND
from input channels to MIX buses
NOTE
• If the ALL button is on, all buttons will be turned off except for
the WITH MIX SEND button located in the lower part of the
SAFE PARAMETER SELECT field.
• You can switch the WITH MIX SEND button on/off while the
ALL button is left on.
G If a MATRIX channel is selected
With the exception of the types of button that are dis-
played, this is the same as for a MIX channel.
These buttons correspond to the following parameters.
Button name Corresponding parameters
All parameters (except for WITH MATRIX
ALL
SEND)
EQ EQ settings (including ATT)
DYNA 1 Dynamics 1 settings
FADER Fader positions
CH ON On/off status of [ON] keys
On/off status and send level of signals sent
WITH MATRIX
from input channels / MIX channels / STEREO/
SEND
MONO channels to MATRIX buses
137
M7CL Owner's Manual
12