Inserting An Internal Effect Into A Channel - Yamaha M7CL Owner's Manual

About the internal effects
Inserting an internal effect
into a channel
Here we will explain how to insert an effect into a channel
by assigning the input/output of the internal effect to the
input/output of the desired channel (except for a ST IN
channel).
1
As described in "Virtual rack operations"
(→ p. 158) steps 1–3, mount an effect in a
rack.
The rack in which an effect is mounted will indicate
the effect type used by that effect, the number of
inputs and outputs, and the levels before and following
the effect.
2
1 Racks
B
INPUT buttons
C
OUTPUT buttons
2
Press the INPUT L button to open the OUT-
PUT CH SELECT popup window, and select
the insert-out of a channel as the input-
source.
For details on the OUTPUT CH SELECT popup win-
dow, refer to step 5 of "Virtual rack operations" (→
p. 158). Insert-out is now assigned to the L input of the
effect.
3
Press the INPUT L button to open the
INPUT CH SELECT popup window, and
select the insert-in of the same channel as
the output-destination.
For details on the INPUT CH SELECT popup win-
dow, refer to step 6 of "Virtual rack operations" (→
p. 158). Insert-in is now assigned to the L output of the
effect.
If you are inserting in a channel that handles a stereo
source, assign the R channel insert-out/insert-in to the
R input/output.
4
Use the navigation keys to access the
OVERVIEW screen for the channel in which
you want to insert the effect.
5
Press the INSERT/DIRECT OUT field to
access the INSERT/DIRECT OUT popup
window.
Make sure that the rack you inserted in the input/out-
put ports is selected. For details on Insert Out/In, refer
to "Inserting an external device into a channel" (→
p. 100).
170
M7CL Owner's Manual
1 3
INSERT ON/OFF button
HINT
• The INSERT/DIRECT OUT popup window also lets you
change the insert-out/in position within the channel.
6
Make sure that the INSERT ON/OFF button
is turned on for the channel into which you
inserted the effect.
If it is off, press the button to turn it on. In this state,
effect insertion is enabled for the corresponding chan-
nel.
7
In the function access area, press the
RACK button to access the VIRTUAL RACK
window, and use the GEQ/EFFECT tab to
display the GEQ/EFFECT field.
8
Press the effect rack that you want to insert
into the channel; the GEQ/EFFECT popup
window will appear.
In this popup window you can edit the parameters of
the GEQ/effect. The popup window contains the fol-
lowing items.
1 2
1 INPUT L/R buttons
These buttons display the OUTPUT CH SELECT
popup window. The operating procedure is the same as
for the INPUT button in the GEQ/EFFECT field.
B
OUTPUT L/R buttons
These buttons display the INPUT CH SELECT popup
window. The operating procedure is the same as for
the OUTPUT button in the GEQ/EFFECT field.
3