Yamaha M7CL Owner's Manual page 103

4
Access either the one-channel or the eight-
channel INSERT/DIRECT OUT popup win-
dow, and press the DIRECT OUT popup but-
ton.
The OUTPUT PORT SELECT popup window will
appear, allowing you to select the output port used for
direct output. The window includes the following
items.
1
2
1 Output port select tabs
These tabs select the output ports shown in the win-
dow. Each tab corresponds to the following output
ports.
• OMNI ........... OMNI OUT jacks 1–16 will be dis-
played.
• SLOT 1–SLOT 3
........... Output channels 1–16 of slots 1–3
will be displayed.
B Output port select buttons
These buttons assign the output port used for direct
output of the currently selected INPUT channel.
5
Use the output port select tabs and the out-
put port select buttons to specify the out-
put port that will be used for direct output,
and press the CLOSE button.
You will return to the INSERT/DIRECT OUT popup
window.
Directly outputting an INPUT channel
6
Press the DIRECT OUT ON/OFF button to
turn it ON.
In this state, direct output is enabled. Adjust the input
level of your external device as necessary.
HINT
• With the factory settings, all are turned on.
7
If you want to change the position of the
direct output, access the one-channel
INSERT/DIRECT OUT popup button, and
press one of the three DIRECT OUT fields.
The DIRECT OUT field you pressed will be enabled,
and the other DIRECT OUT field will be disabled.
8
If you want to adjust the level of the direct
output, access either the one-channel or
the eight-channel INSERT/DIRECT OUT
popup window, and operate the DIRECT
OUT LEVEL knob.
9
When you have finished making all set-
×
tings, click the " " symbol located in the
upper right to close the window.
You will return to the OVERVIEW screen.
10
As desired, make direct output settings for
other channels as well.
103
M7CL Owner's Manual
9