Yamaha M7CL Owner's Manual page 21

■ NAVIGATION KEYS section
In this section you can select the channels that will be con-
trolled by the Centralogic section and in the touch screen.
NOTE
• If you press and hold a navigation key for two seconds or longer,
that key will blink. At this time, only the object of control for the
Centralogic section will be changed to the corresponding channels
and fixed. If you press a different navigation key while the first key
is blinking, only the object of control in the touch screen will be
changed.
9 8
3 4
1 2 5
6
1 [IN 1-8] key
B
[IN 9-16] key
C
[IN 17-24] key
D
[IN 25-32] key
These keys select INPUT channels 1–8, 9–16, 17–24, and
25–32 respectively.
L
J K
7
E
[ST IN] key
This key selects ST IN channels 1–4.
F
[DCA] key
This key selects the DCA groups.
G
[MIX 1-8] key
H
[MIX 9-16] key
These keys select MIX channels 1–8 and 9–16 respec-
tively.
I
[MATRIX] key
This key selects MATRIX channels 1–8.
J
[STEREO] key
This key assigns the STEREO channel L/R and the
MONO channel to modules 1–3 of the Centralogic sec-
tion. In this case, modules 4–8 are not used.
K
[IN 33-40] key {M7CL-48 only}
L
[IN 41-48] key {M7CL-48 only}
These keys select INPUT channels 33–40 and 41–48
respectively.
Top panel
21
M7CL Owner's Manual
2