Yamaha M7CL Owner's Manual page 162

Graphic EQ operations
3
Press the OUTPUT button to open the
INPUT CH SELECT popup window where
you can select the output-destination for
the rack, and choose the insert-in to which
you want to assign the output of the GEQ
(multiple selections are allowed).
The insert-in will be assigned to the output of the
GEQ. (For details on the INPUT CH SELECT popup
window → p. 158).
HINT
• If an insert-in is selected as the output-destination, the input-
source of the rack will automatically be set to the insert-out of
the same channel.
4
In the GEQ/EFFECT field, press the rack in
which you mounted the GEQ.
The GEQ/EFFECT popup window will appear, allow-
ing you to edit the parameters of the GEQ or effect.
HINT
• The popup windows for the 31 Band GEQ and the
Flex15GEQ are nearly identical. However, the Flex15GEQ
individually displays two GEQ units (A and B) mounted in a
single rack.
2
1 Rack select tabs
These tabs switch between racks 1–8. For a rack in
which a Flex15GEQ is mounted, the tabs will be split
as xA and xB (x is the rack number).
B
INPUT button
This button displays the OUTPUT CH SELECT
popup window, where you can select the input source
of the rack. The operating procedure is the same as for
the INPUT button in the GEQ/EFFECT field.
C
OUTPUT button
This button displays the INPUT CH SELECT popup
window, where you can select the output destination of
the rack. The operating procedure is the same as for
the OUTPUT button in the GEQ/EFFECT field.
162
M7CL Owner's Manual
3 4 5 6
1
D
GEQ LINK button
This button links adjacent GEQ units. In the case of a
31 Band GEQ, the GEQ units in adjacent odd-num-
bered/even-numbered racks will be linked. In the case
of a Flex15GEQ, the GEQ (A) and GEQ (B) within
the same rack will be linked.
NOTE
• The GEQ LINK button is shown only if linking is possible.
E
FLAT button
This returns all bands of the currently selected GEQ to
0 dB.
F
GEQ ON/OFF button
Switches the currently selected GEQ on/off.
5
If you're using a stereo source, link the two
GEQ units.
You will be able to use the GEQ LINK button if you
have selected a 31 Band GEQ or Flex15GEQ for adja-
cent odd-numbered/even-numbered racks. When you
turn this button on, the following popup window will
appear. To enable linking, press any button other than
CANCEL. The popup window contains the following
items.
1 GEQ x→y button ("x" and "y" are the
rack number, or the rack number and the
alphabetical characters A or B)
The parameters of "x" will be copied to "y," and then
linked.
→
B
GEQ y x button
The parameters of "y" will be copied to "x," and then
linked.
C
RESET BOTH button
The parameters of both will be initialized, and then
linked.
D
CANCEL button
Cancels the link and closes the popup window.
When you link GEQ units, a symbol will appear in the
GEQ/EFFECT field to indicate the linked status.
1
2
3
4
Indicate the linked status