Yamaha M7CL Owner's Manual page 96

Changing the output patch settings
● RACK
The input ports of rack 1–8 will be displayed.
HINT
• For details on the GEQ, refer to p. 161.
E
Output port select buttons
These buttons assign an output port to the currently
selected output channel.
F
Tabs
Use these tabs to switch between items.
3
Use the output port select tabs and the out-
put port select buttons to specify the out-
put port that will be assigned to that
channel.
If the output port select buttons are not shown at the
bottom of the window, press the PATCH tab.
4
Use the navigation keys and the [SEL] keys
to switch the output channels being con-
trolled, and specify their output ports in the
same way.
5
When you have finished making settings,
×
press the " " symbol located in the upper
right to close the window.
You will return to the OVERVIEW screen.
96
M7CL Owner's Manual
● Selecting the output channel for each
output port
Here's how you can select the output channel that will be
the output source for each output port.
1
In the function access area, press the
SETUP button to access the SETUP screen.
OUTPORT SETUP button
2
In the SYSTEM SETUP field located in the
center of the screen, press the OUTPORT
SETUP button to open the OUTPUT PORT
popup window.
In the OUTPUT PORT popup window you can assign
the source channel for each output port. The popup
window includes the following items.
2
1
3
4
5
6
7
8
9
J
1 Slot number / Card type
If an output channel of slot 1–3 is selected for opera-
tions, this shows the slot number and the type of I/O
card installed in that slot.
B
DELAY SCALE field
Here you can select the units for the delay time shown
below the delay time knob (
• METER (343.59m/s)
...........The delay time is shown as a dis-
tance in meters, calculated as the
speed of sound (343.59 m/s) at an
air temperature of 20 °C (68 °F)
multiplied by the delay time (sec-
onds).
5
).