Yamaha M7CL Owner's Manual page 144

Using the Monitor function
HINT
• If desired, you can specify output ports only for MONITOR
OUT L and R, and monitor through two speakers.
• If you have not specified an output port for MONITOR OUT C,
selecting the MONO (C) button or LCR button as the monitor
source will automatically cause the MONO channel signal to
be distributed to MONITOR OUT L/R.
6
To enable monitoring, press the OUTPUT
button to turn it on.
The monitor source you selected in step 4 will be sent
to the output destination you specified in step 5.
HINT
• The PHONES OUT jack will always output the monitor signal,
regardless of whether the OUTPUT button is on or off.
144
M7CL Owner's Manual
7
To adjust the monitor level, use the MONI-
TOR LEVEL knob located in the SCENE
MEMORY/MONITOR section of the top
panel.
If PHONES LEVEL LINK is ON, you can use both
the MONITOR LEVEL knob and the PHONES
LEVEL knob to adjust the monitor level when moni-
toring through headphones.
The MONITOR LEVEL knob will apply to the
PHONES OUT jack as well.
8
Make settings for Dimmer, Delay, and Mon-
aural as desired.
HINT
• Monitor on/off operations, selection of the monitor source,
and dimmer on/off operations can also be assigned to user-
defined keys ( → p. 200).