Scene Memory; About Scene Memories; Using Scene Memories; Storing A Scene - Yamaha M7CL Owner's Manual

This chapter explains how to perform scene memory operations.
On the M7CL, the mix parameter settings and input/output port patching can be assigned a
name and stored into memory (and later recalled from memory) as a "scene."
Each scene is assigned a number in the range of 000–300. Scene 000 is a read-only scene used
for initializing the mix parameters, and scenes 001–300 are writable scenes.
Each scene contains the position of the top panel faders and [ON] keys, as well as the following
parameters.
• Input/output port patching
• Bus settings
• Head amp settings
• EQ settings
• Dynamics 1 and 2 settings
• Rack (GEQ/effect) settings
• Pan/balance settings
• Insert/direct out settings
• On/off status and send level of signals sent to MIX buses
• On/off status and send level of signals sent to MATRIX buses
• DCA group settings
• Mute group settings
• Channel link settings
This section explains how to store and recall the M7CL's mix parameters as "scenes."

Storing a scene

To store the current mix settings as a scene memory, you
can either use the keys of the top panel SCENE MEM-
ORY/MONITOR section, or use the SCENE LIST win-
dow.
● Using the keys of the SCENE MEMORY/
MONITOR section
1
Use the pad controls of the top panel or the
buttons in the touch screen to set the mix
parameters as desired.
Chapter 12

Scene memory

About scene memories

Using scene memories

2
Use the SCENE MEMORY [▲]/[▼] keys to
select the store-destination scene number.
The number of the currently selected scene is shown in
the SCENE field of the function access area. When
you select a new scene number, the number will blink.
This blinking indicates that the displayed scene num-
ber is different than the currently-loaded scene num-
ber.
M7CL Owner's Manual
12
SCENE MEMORY
▲ ▼
[ ]/[ ] keys
125