Troubleshooting For Error Messages - FUNAI BH2-M200 Owner's Manual

Troubleshooting for Error Messages

Error message
Disc Error
— Please eject the disc. —
Playback feature may not be
available on this Disc.
USB Device Error
— Please check the USB Device. —
There is no playable file in the USB
Device.
Or the format is not available.
SD Card Error
— Please check the Memory Device. —
There is no playable file in the
Memory Device.
Or the format is not available.
Region Error
Playback is not authorized in your
region.
Region code of this disc:
BD-Live Setting Error
Network connection is interrupted.
Please confirm "BD-Live Setting".
Software Update
Update failed.
Please power off.
Software Update
Update failed.
Please unplug the AC cord.
And when you connect the AC cord,
the unit retry update.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This programme is not allowed
to be recorded.
Recording Error
Can not record on this disc.
Recording Error
This disc is protected
and not recordable.
Recording Error
Disc is full.
(No area for new recording)
Recording Error
Can not record more than
maximum titles on one disc.
Recording Error
Can not record more than
maximum chapters on one disc.
76
EN
Cause
• An unplayable disc is inserted in the unit.
• The disc is upside-down.
• Format of the files in the connected USB
device is not supported.
• Incompatible USB device is connected.
• Format of the files in the connected SD
card device are not supported.
• Incompatible SD card device is
connected.
• Playback is not authorised in the region
of the DVD-video that you inserted in the
unit.
• It is prohibited to access the network if
your BD-Live™ disc does not have the
certification of the creator of the
contents.
• The access may be prohibited or limited
by the "BD-Live Setting".
• Could not read the software.
• Software update is failed.
• The current selected parental level in the
"Settings" menu prohibits playback.
• The recording function encountered a
copy prohibited programme.
• You are trying to record onto a disc that
is unrecordable, or the disc status does
not satisfy recording requirements.
• The disc is dirty.
• The disc is damaged.
• You are trying to record onto a VR mode
DVD-RW which contains recordings from
another recorder.
• You are trying to record onto a BD-RE/-
R, VR mode DVD-RW, or DVD+RW/+R
that is set as protected in the "Settings"
Menu.
• You are trying to record onto a BD-RE,
BD-R that has no space for recording.
• You are trying to record onto a BD-RE/-R
on which the number of recorded titles
has reached the maximum.
• You are trying to record onto a BD-RE/-R
disc on which the number of recorded
chapters has reached the maximum.
Solution
• Insert a standard disc. (See pages 7-8.)
• Insert the disc with the labelled side
facing up.
• Insert a compatible USB device with
supported file format. If this does not
solve the problem, use other type of
compatible USB device.
• Insert a compatible SD card device with
supported file format. If this does not
solve the problem, use other type of
compatible SD card device.
• Insert a DVD-video with region code 2 or
ALL.
• Check the "BD-Live Setting".
• Restart the unit. Then retry the update.
• Unplug the mains cable, then plug it in
again. The unit will automatically resume
the update.
• Check the "Parental" setting.
(See page 68.)
• You cannot record copy prohibited
programmes.
• Insert a recordable disc, and ensure the
disc status satisfies the recording
requirements. (See page 27.)
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Disc may need formatting.
• Remove the disc protect setting in the
"BD/DVD Menu". (See page 57.)
• Insert a recordable disc with enough
recording space.
• Delete unnecessary titles.
(See page 56.)
• Delete unnecessary titles.
• Delete unnecessary chapter marks.