Error Message - FUNAI B4-M500 Service Manual

Note: Only error messages for the unit's corresponding media will appear.
Error
Disc Error
Loader Error
Parental Lock Error
Region Error
The device connected for HDMI
connection does not support HDCP.
USB Error
BD-Live Network Connecting Error
LAN Cable Not Connected
Cannot Acquire DHCP Server
Cannot Acquire IP Address
Already Existing IP Address
No Response From Default
Gateway
Cannot Connect To DNS Server
Cannot Connect To Server
Cannot Confirm Firmware Version

ERROR MESSAGE

Disc Error
- - Please eject the disc. - -
Playback feature may not be available on this Disc.
Disc Error
- - Please eject the disc. - -
Playback feature may not be available on this Disc.
Loader Error
The unit stopped automatically due to loader error.
Please open the disc tray once and then close it.
Parental Lock On
The current selected parental level prohibits playback.
Region Error
Playback is not authorized in your region.
Region code of this disc :
(There is no message.)
Memory Device Error
- - Please check the Memory Device. - -
There is no playback file on the Memory Device or Device has incorrect/
no format.
BD-Live Setting Error
Network connection is interrupted. Please confirm "BD-Live Setting".
The cable is not connected.
Please confirm the connection of the cable.
DHCP cannot be acquired.
Please confirm connection or set it with the manual operation.
Internet Protocol address is not set.
Please confirm the set content.
The equipment with same Internet Protocol address already exists.
Please set another Internet Protocol address.
There is no response from Default gateway.
Please confirm the address of Default gateway.
It is not possible to connect to the DNS server.
Please confirm the Internet connection or the DNS address setting.
It is not possible to connect to the server.
Please contact our support center.
It is not possible to confirm the software version.
Please contact our support center.
1-8-1
Message
ECB91/93/95ER