Functional Overview; Front Panel; Rear Panel - FUNAI BH2-M200 Owner's Manual

Functional Overview

Front Panel

l
You can also turn on the unit by pressing these buttons.
Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the
mains cable.)
1 A (open\close) button*
2 Q (standby/on) button*
3 Infrared sensor window
4 DISC mode indicator
5 HDD mode indicator
6 Display
7 Disc tray
8 USB port
9 SD/SDHC CARD slot
Button names described in the owner's manual
The instructions in this manual are described mainly with the operations using the remote control. Some operations can be
carried out using the buttons on the front panel.

Rear Panel

1
1 Mains cable
2 ANTENNA OUT
3 ANTENNA IN
4 LAN terminal
5 HDMI OUT jack
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
• After turning off the unit, leave the mains cable plugged for about one minute. Otherwise it may cause data loss or the unit may
not work properly.
• This unit does not have an RF modulator.
10
EN
7
1
2
2 3 4
1* 1
3 4 5
8 9 10 11
10 REC1 indicator
11 REC2 indicator
12 RESET button
When the front panel display shows an abnormal
indication, or when the unit does not respond at all, push
this button with some kind of pointed tool.
13 PROG. /
. K L
14 STOP C button
15 PLAY B button*
16 REC I button
5
6 COAXIAL (digital audio out) jack
7 AUDIO OUT jacks
8 VIDEO OUT jack
9 AV1 (TV) scart socket
10 AV2 (DECODER) scart socket
2* 2
6
12 13 14 15* 16
1
buttons
1
6 7 8 9 10