FUNAI BH2-M200 Owner's Manual page 75

Symptom
Titles cannot be edited or deleted.
Dubbing cannot be executed.
Titles cannot be edited or deleted.
The capacity of the disc doesn't
increase even if the recorded
programme is deleted.
Dubbing cannot be executed.
The remote control does not function.
Cannot connect to the network.
Cannot connect to the network while
my PC is connected to the network.
SD cards cannot be operated or read.
The capacity of the SD card
decreased.
Cannot use the BD-Live™ function or
download of data does not perform
properly.
Cannot play back BD-video (BD-ROM
Profile 2.0).
USB device cannot be operated or
read.
• The titles or the disc itself may be protected. Cancel the protection.
(See pages 55 and 57.)
• When the number of the titles or the chapters exceeds the maximum recordable
number, the dubbing will not be executed.
• The titles in the BD-R, video mode DVD-RW, DVD-R/+R cannot be edited or
deleted if they are finalised.
• With DVD+RW and video mode DVD-RW, the disc space will increase only
when the last title is deleted.
• Check if the disc is compatible for recording. (See page 37.)
• No batteries in the remote control or the batteries may be weak. Replace the
batteries.
• Make sure there is no obstacle between the remote control and the unit.
• Try getting closer to the unit. (See page 12.)
• If above solutions do not solve the problem, please call an Authorised Service
Centre.
• Check if the LAN cable connection is properly made.
• Turn on the modem or broadband router.
• Check the network settings.
• Check if the broadband router and/or modem is correctly connected.
• Check the "BD-Live Setting".
• Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
• The format of the card is not accepted by this unit or the card is not compatible.
• Check if the card is properly inserted.
• Data may be written to the SD card when a BD-video that supports the virtual
package is used and an SD card is in the slot.
• Insert an SD card with enough space (1GB or more).
• Check if an SD card is correctly inserted.
• Make sure the write-protect switch on the SD card is not enabled.
• Insert an SD card (1GB or more) which is formatted on this unit.
• Some discs with BD-Live™ function require memory when playing back the
content.
• Do not remove the SD card during playback.
• Make sure the write-protect switch on the SD card is not enabled.
• Check if the USB device is compatible with this unit.
• Check if the USB device is properly connected.
• If you are connecting a camcorder or digital camera which uses an SD card as a
memory media using USB cable, try inserting the SD card directly to the unit.
• The USB device may not be recognised if connected during playback,
recording, or dubbing.
Remedy
75
EN