Dvb Operation - FUNAI BH2-M200 Owner's Manual

DVB Operation

The following operations are available while viewing TV
channels through this unit's tuner.
Selecting a Channel
Press [INPUT SELECT] repeatedly to switch DVB / external
input mode.
The mode changes as follows:
DVB mode AV1
Using [PROG. G \ H] or
[the Number buttons]
You can select a channel using [PROG. G \ H] or directly
enter the channel using [the Number buttons].
• [PROG. G \ H] can select only the channels stored in the
channel map.
Notes on using [the Number buttons]:
• This unit indicates channels of three digits numbers. The
channels will be identified 2 seconds after you press the
channel number. For example, if you want to select channel
6, press [6] and wait for 2 seconds. Station name may not be
displayed when the signal is weak.
Using Quick Select Window
With "Quick Select" window, you can sort the channels by
favourite groups making it easy to find the desired channel.
(Refer to "Editing Favourite Groups" on page 24 on how to
create favourite groups.)
Guide to Quick Select Window
To call up the "Quick Select" window...
While viewing a DVB programme, press [ENTER\OK].
Quick Select
1 ITV1
2 ITV3
3 Teletext
5 Channel 4
8 More 4
75 CITV
82 Sky News
444 SETANTA SPORTS
ALL
OK RETURN
Watch Exit
1 Channel list for the selected favourite group
2 Favourite group
3 Operable buttons
AV2
1
2
3
1 In the "Quick Select" window, switch favourite group
using [s \ B].
• If no groups have been created, [s \ B] does not work.
• A group without any channel will be skipped.
2 Highlight the desired channel, then press
[ENTER\OK] to tune into the channel right away.
3 Press [RETURN\BACK] to exit.
Displaying the Teletext Screen
Many broadcasters provide a DVB Teletext service in the form
of a dedicated Teletext channel. This digital service includes
high quality text and graphics along with advanced navigation
options.
1
While viewing a DVB programme, press [TEXT]
to display Teletext screen.
• Teletext for the TV channel will be displayed.
2
Use [Red] / [Green] / [Yellow] / [Blue] to follow
the instructions on screen.
3
Press [TEXT] to switch the Teletext screen off.
Note
• [TEXT] is not available during recording.
Changing the Audio Mode
Many DVB channels transmit multi audio information along
with their DVB channels. You can select the desired audio
mode and audio language.
1
While viewing a DVB programme, press
[AUDIO].
• Information display will appear.
Audio 1 ENG Dolby D
2
Select your desired audio language using
[K \ L], then press [B].
3
Select "Stereo", "Left" or "Right" using [K \ L],
then press [ENTER\OK].
Note
• If the programme is changed, the audio language will be
switched back to the language you set in the "Audio
Language". Refer to "Audio Language" on page 58.
/ 3 Stereo
25
EN