Network Connection With Lan - FUNAI BH2-M200 Owner's Manual

Network Connection with LAN

By connecting this unit to the Internet, you can update the
software via the Internet or access the BD-Live™ service.
Networking equipment
(modem, etc.)
LAN
LAN cable
(not supplied)
Internet
Caution
• Do not insert any cable other than a LAN cable to the LAN
terminal to avoid damaging the unit.
Note
• After connecting a LAN cable, set up necessary network
settings. (For the network setup, refer to "Network
Connection" on page 69.)
• For more information about BD-Live™, refer to "Enjoying
BD-Live™ Discs with Internet" on page 48.
• If your network equipment (modem, etc.) does not have
broadband router functions, connect a broadband router.
• If your network equipment (modem, etc.) has broadband
router functions but there is no vacant port, use a hub.
• For a broadband router, use a router which supports
10BASE-T/100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this
unit.
• Please purchase shielded LAN cables at your local store
and use them when you connect to network equipment.
Hub or broadband router
WAN LAN
5 4 3 2 1
LAN cable
(not supplied)
19
EN