FUNAI BH2-M200 Owner's Manual page 23

Changing the Pincode
Follow the instruction below to change the pincode for DVB
"Parental Control".
1
In stop mode, press [SETUP].
2
Go to "DVB Menu" A "Parental Control", then
press [ENTER\OK].
• Pincode entry field will appear.
3
Enter the current pincode.
4
Move the highlight to the pincode entry field,
then enter new pincode.
Parental Control
Channel Lock On
Maturity Lock -18
Change Pincode
• Press [CLEAR] to erase numbers entered incorrectly at
once.
• Press [s] to erase the numbers entered incorrectly one
by one.
5
Press [ENTER\OK].
• Your new pincode is now set.
6
Press [RETURN\BACK] to exit.
• If you forget the pincode, press [4], [7], [3], [7] to cancel the
current pincode, and re-create the new pincode.
Editing Channel Map
Channel map is the list of the channels stored in this unit's
tuner. You can customise the channel map to suit your
preference.
Editing of the DVB channel map is done in the "Edit Channels"
screen.
Guide to Edit Channels Screen
To call up "Edit Channels" screen...
1
In stop mode, press [SETUP].
2
Go to "DVB Menu" A "Edit Channels", then
press [ENTER\OK].
• Pincode entry field will appear. Enter the correct pincode
to proceed.
• "Edit Channels" screen will appear.
Edit Channels
3 ITV1
Channels
Favourite
1 2
Access
Skip
Access Skip Move
OK 1 - 4
Select OK Favourite
1 Channels: Select channels using [s \ B].
2 Current setting status:
to : Indicates which favourite group the channel
1 4
belongs to.
: Appears when the channel is selected for
"Channel Lock".
: Appears when the channel is selected for
access prohibition.
: Appears when the channel is set to be
skipped.
3 Operable buttons
1
3 4
2
3
RETURN
Return
EN
23