FUNAI BH2-M200 Owner's Manual page 65

Category Menus / Options
Settings HDMI
• Available only when
the display device is
connected to an
HDMI compatible
device with an HDMI
cable.
Others
Format RGB
YCbCr
RGB Range Normal
Enhanced
HDMI Video Auto
Resolution
480p/576p
720p
1080i
1080p
1080p24
HDMI Deep Auto
Colour
Off
• Available only
when the display
device supports
Deep Colour
feature.
HDMI Audio Out On
E Page 17
Off
fun-Link On
(HDMI CEC)
Off
E Page 68
Display Menu On
Language (fun-
Off
Link)
E Page 68
• Available only
when the "fun-
Link(HDMI CEC)
" is set to "On".
Panel Display Auto
Bright
Dark
Screen Saver Off
1 minute
5 minutes
10 minutes
15 minutes
Descriptions
When connected by an HDMI cable, sets the
appropriate colour space for your display device.
• When the connected device is not compatible
with the "YCbCr", "RGB" will be output
regardless of the setting here.
Sets the black level when outputting the RGB
signal.
Sets the resolution of the video signal being
output from the HDMI OUT jack.
"Auto":
HDMI video resolution will be selected
automatically depending on the connected HDMI
device.
• When "1080p"is selected, even if the video
source is 1080p24, it will be output in 1080p50.
• Even if the video material is 1080p24 and
"1080p24" is selected, when connected device
is not compatible with 1080p24, it will be output
in 1080p50.
• Even if "720p" is selected, when the playing
material is not 720p, it will be output in 1080i.
• If inappropriate resolution is selected and the
display device goes blank, wait for 15 seconds
for auto recovery.
• Holding [PLAY B] on the front panel for 5
seconds resets the setting to the default.
Reduces the posterisation effect of the playback
picture.
"Auto":
Reduces the posterisation effect by automatically
outputting up to 36 bit colour whenever the unit
recognises the connected display device supports
Deep Colour feature.
"Off":
Outputs the standard 24 bit colour.
Sets whether to output the audio from the HDMI
OUT jack.
Sets whether to utilise the fun-Link(HDMI CEC)
function.
Recognises the OSD (on-screen display)
language set for the TV and automatically sets the
same language as the "Display Menu Language"
(OSD menu language) for this unit.
Sets the brightness of the front panel display.
"Auto":
Front panel display gets brighter when the power
is on and darker when the power is off.
"Bright":
Front panel display gets brighter.
"Dark":
Front panel display gets darker.
Sets the time it takes before the screen saver
activation.
65
EN