FUNAI BH2-M200 Owner's Manual page 60

Category Menus / Options
Settings Video
Audio
60
EN
Still Mode Auto
Field
Frame
BD Audio Mode Mix Audio Output
HD Audio Output
BD-V BD-V BD-V
DRC Auto
On
Off
Down Sampling On
Off
Descriptions
Adjusts picture resolution and quality in still mode.
"Auto":
Automatically selects the best resolution setting
("Frame" or "Field") based on the data
characteristics of the pictures.
"Field":
Stabilises the pictures, although the picture quality
may become coarse due to the limited amount of
data. Select "Field" when the pictures are still
unstable even if "Auto" is selected.
"Frame":
Displays relatively motionless pictures in higher
resolution. "Frame" improves the picture quality,
although it may unstabilise the pictures due to
alternate output of 2-field data.
• An individual picture on the TV screen is called
"Frame", which consists of two separate images
called "Field". Some pictures may be blurred at
the auto setting in "Still Mode" setting due to
their data characteristics.
For Blu-ray Disc™, selects whether to output the
secondary and interactive audio with primary
audio if it is available or only the primary audio.
"Mix Audio Output":
The audio for the secondary video and the
interactive application will be output together with
the audio for the primary video.
• The secondary audio is the audio for the
secondary video (Directors comment etc.) and
the interactive audio is the audio for the
interactive application (Button click sounds etc.).
"HD Audio Output":
Outputs only the primary audio. Set this mode in
order to output Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS or DTS-HD audio of Blu-ray
Disc™ through HDMI connection.
Sets whether to compress the range of sound
volume (dynamic range control) when Dolby
Digital, Dolby Digital Plus or Dolby TrueHD audio
is played back.
"Auto":
When the discs recorded in Dolby TrueHD format
are in playback, this unit detects DRC setting of
the disc and set "DRC" setting to "On" or "Off"
automatically.
Sets the digital audio output when playing back
Blu-ray Disc™ or DVD recorded in LPCM.
"On":
LPCM signals are converted to 48 kHz for output.
Set to "On" when using digital connections to an
AV amplifier that is not compatible with sampling
frequencies of 96 kHz.
"Off":
For Blu-ray Disc™ and DVD recorded in LPCM
without copyright protection, 2-channel audio
signals up to 96 kHz are output as LPCM signals.
If the audio source is 192 kHz, it is down
converted to 96 kHz.