Finalising Discs - FUNAI BH2-M200 Owner's Manual

Finalising Discs

VR
BD-R BD-R BD-R DVD-RW DVD-RW DVD-RW DVD+RW DVD+RW DVD+RW
You will need to finalise discs to play them back in other units.
Finalising may take from several minutes up to an hour.
A shorter recording period on the disc will require a longer
time period for finalisation. Do not unplug the mains cable
during finalisation.
1
Go to "BD/DVD Menu" A "Finalise", then press
[ENTER\OK].
2
Select "Yes" using [K \ L], then press
[ENTER\OK].
Finalising will start.
You cannot cancel finalising once it has started.
3
Finalising is complete.
Note
• Refer also to the "Making Discs Playable on Other Players
(Finalise)" on page 40.
• To release the finalisation of the disc, select "Undo Finalise"
1
at step .
• To release the finalisation of the DVD+RW, make an
additional recording to the disc.
• If you insert a DVD-RW finalised with this unit, "Undo
Finalise" will appear instead of "Finalise".
• DO NOT power off during finalising. This may result in a
malfunction.
Making Discs Playable on Other Players
(Finalise)
After recording, you must finalise the disc to play it back in
other players.
You cannot finalise discs on other recorders.
BD
Disc Type BD-R
-RE
✔
Finalise (manual)
After finalising
Automatic title
menu making
Undo
finalising
Additional
recording or
editing
*1) Automatically finalised after recording.
*2) Additional recordings or editings will automatically undo the
finalisation.
✔: Available
40
EN
DVD+R DVD+R DVD+R
DVD-RW DVD DVD DVD
-R +RW
Video VR
Video +VR +VR
Mode Mode
Mode Mode Mode
✔ ✔
*1 *1
✔ ✔ ✔
✔
✔ ✔
*2
Gray: Not available
+R
✔
✔