Basic Setup / Dvb Operations; Basic Setup - FUNAI BH2-M200 Owner's Manual

Basic Setup / DVB Operations

Basic Setup

Finding the Viewing Channel
1
After you have made all the necessary
connections, press [STANDBY\ON Q] to turn on
the unit.
2
Turn on your TV.
3
Press the button on the TV's remote control that
accesses the external input channel repeatedly
until you see the "Initial Setting" screen. (The
button may be labelled "SOURCE", "AV", "AUX"
or "SELECT". Refer to your TV's user manual.)
Initial Setting
Select the language for Setup Display.
Áúëãàðñêè
Èeština
English
Eesti
Français
If you see the "Initial Setting" screen, that is the correct
viewing channel to see the images output from this unit.
Make sure to always select this channel on your TV when
using this unit.
• If the TV is connected by an HDMI cable, it may take a
while for the opening picture to come up.
20
EN
Initial Setting
When you turn on this unit for the first time, you need to follow
these steps.
1
Press [STANDBY\ON Q].
2
Turn the TV on. Select the input to which the
unit is connected.
"Initial Setting" will automatically appear.
3
Select your desired language for the OSD, then
press [ENTER\OK].
Initial Setting
Select the language for Setup Display.
Áúëãàðñêè
Èeština
English
Eesti
Français
• The language selected here will also be used as...
- Audio language for DVB programmes
- Subtitle language for DVB programmes
- Disc menu language
4
Select your desired country for receiving your
local channels, then press [ENTER\OK] to go to
the next step.
Initial Setting
Select the Country for Auto Tuning.
Bulgaria
Czech Republic
Estonia
France
Germany