FUNAI BH2-M200 Owner's Manual page 5

Maintenance
CLEANING THE UNIT
Use a soft cloth slightly moistened with a mild detergent
solution. Do not use solutions containing alcohol, spirits,
ammonia or abrasive.
CLEANING DISCS
If a disc becomes dirty, clean it with a cleaning cloth. Wipe the
disc from the centre out. Do not wipe in a circular motion.
Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
DISC HANDLING
Handle the discs so that fingerprints and dust do not adhere
to the disc surfaces.
Always store the disc in its protective case when it is not in
use.
HDD HANDLING
• HDD is a precision apparatus that is susceptible to vibration,
strong impact or dirt. Depending on the installation
environment or handling, the unit may become partially
damaged or in the worst case, recording or replaying may
not be available. Especially while the HDD is in motion, do
not subject it to vibration or strong impact or pull out the
power plug. And if a power failure occurs, the content of the
recording / replaying programme may be lost.
• HDD rotates at high speed when in operation. Be sure that
rotation has stopped and then move the unit without
subjecting it to strong impact or vibration.
SERVICING
If the unit becomes inoperative, do not try to fix the problem by
yourself. There are no user serviceable parts inside. Turn the
unit off, unplug the mains cable, and consult your dealer or an
authorised service centre.
CLEANING THE DISC LENS
If the unit does not perform correctly even though you have
referred to "Troubleshooting" and the relevant sections in the
owner's manual, the laser optical pickup unit may be dirty.
Consult your dealer or an authorised service centre for
inspection and cleaning of the laser optical pickup unit.
5
EN