Network Update - FUNAI B4-M500 Service Manual

Network Update

1. Press [HOME] button to display Setup menu.
2. Select Settings - Others - Software Update -
Network.
3. When "Yes" is chosen, the screen appears in Fig. j
and the unit starts connecting to the network.
Software Update
Network Connecting...
4. The firmware version confirmation screen (Fig. k)
will appear on the screen. Select "Yes" and press
[OK] button.
Software Update
Current Version : X.XX.XX
Latest Version : X.XX.XX
The latest software can be downloaded.
Do you want to download?
No
5. Firmware downloading starts.
6. Upon completion of downloading, Fig. l will appear
on the screen.
Press [OK] button.
Software Update
Software download has been completed.
Software update will start shortly.
Press [OK].
7. The unit starts reading the firmware. Fig. m will
appear on the screen.
Software Update
1. Loading 2. Updating
Loading Software...
If you want to exit update, press [RETURN].
Then all download data will be erased.
Fig. j
Yes
Fig. k
Fig. l
Fig. m
8. Updating starts automatically. Fig. n will appear on
the screen.
1. Loading
Updating Software...
Please wait for a few minutes.
Do not unplug the AC cord or interrupt updating process.
When update is completed unit will automatically turn off,
and unit will automatically turn back on.
Updating :
Success :
9. The power turns off automatically.
10. The power turns back on automatically.
Note: The setup setting configured before the update
will be kept.
Network Error Message
No.
The cable is not connected.
1
Please confirm the connection of the cable.
DHCP cannot be acquired.
2 Please confirm connection or set it with the
manual operation.
Internet Protocol address is not set.
3
Please confirm the set content.
The equipment with same Internet Protocol
4 address already exists.
Please set another Internet Protocol address.
There is no response from Default gateway.
5 Please confirm the address of Default
gateway.
It is not possible to connect to the DNS server.
6 Please confirm the Internet connection or the
DNS address setting.
It is not possible to connect to the server.
7
Please contact our support center.
It is not possible to confirm the software
8 version.
Please contact our support center.
Cannot connect to the wireless network.
9
Please confirm the wireless network setting.
1-7-4
Software Update
2. Updating
flash alternately.
remain on.
Fig. n
Error Message
ECB91_93_95FW