NOTE
•
For more information about entering the copy quantity, see "Specifying the
Required Number of Copies," on p. 1-24.
•
The paper size is displayed according to the original size you have selected in
step 4.
7
Press
Copying starts.
NOTE
•
To cancel all settings and return the machine to the Standby display, press
[Reset].
•
To cancel copy jobs, see "Canceling a Copy Job," on p. 1-19.
Book Frame Erase
The Book Frame Erase mode erases dark borders, as well as center and contour
lines that appear if you are copying facing pages in a bound original onto a single
sheet of paper.
Before using this mode, set the unit of measurement of the frame erase width in the
Additional Functions menu. (See "Frame Erase Width Unit of Measurement," on
p. 3-26.)
IMPORTANT
•
Place the book to be copied on the platen glass. The Book Frame Erase mode cannot be
used when the original is placed in the feeder.
•
The Book Frame Erase mode cannot be used with the 2 on 1 Combination mode or
Different Size Originals mode.
1
Place your original on the platen glass ➞ press
Erase].
If necessary, see the screen shot in step 2 of "Original Frame Erase," on p. 2-7.
[Start].
[Frame
2-9
Frame Erase
2