Original Size - Canon IR2020 Copying Manual

3
1
4
1-6
Flow of Copy Operations
Press - [numeric keys] to enter the desired copy
0 9
quantity (1 to 99).
100% AUTO A4
A TEXT
NOTE
For instructions on setting the number of copies, see "Specifying the Required
Number of Copies," on p. 1-24.
Press [Start].
SCANNING
Copying starts.
IMPORTANT
You cannot change copy mode settings, such as the copy quantity, paper size, and
copy ratio while the machine is copying.
NOTE
•
If you place the original on the platen glass of the iR2016 model, or if the machine
cannot detect the original size, specify the original size after pressing

ORIGINAL SIZE

A4
] to select the paper size ➞ press
Press [ ] or [
•
If there is a job in hand, the machine scans the original, and waits to print it.
Printing starts when the current job is complete.
•
When the the message <MEMORY FULL> appears on the LCD display, do one of
the following:
- Divide your originals into several sets and copy them separately.
- Install an additional memory.
- If there are fax documents received in memory, print them out. (Only when the
optional Super G3 FAX Board-T1 is installed.)
1O
[Start].
[Start].