Canon IR2020 Copying Manual page 70

4
Press [ ] or [
[OK].
You can also use
[Clear] to clear your entry.
ERASE WIDTH LEFT
©
The Standby display appears, and an asterisk (*) appears on the LCD display
indicating that the Binding Hole Erase mode is set.
NOTE
•
You can set the binding erase width from 3 mm to 20 mm (3/16" to 13/16").
•
The default setting is 18 mm (3/4").
•
If you are using the numeric keys to enter the value, be sure to enter a leading zero
to specify one-digit value. (e.g., If you want to specify "4 mm," enter as "04 mm.")
5
Press - [numeric keys] to enter the desired copy
0 9
quantity (1 to 99).
100% * AUTO A4
A TEXT
NOTE
For more information about entering the copy quantity, see "Specifying the
Required Number of Copies," on p. 1-24.
] to set the binding erase width ➞ press
- [numeric keys] to enter the binding erase width, and
0 9
18mm
O5
2-13
Frame Erase
2