Using The System Monitor Screen - Canon IR2020 Copying Manual

1

Using the System Monitor Screen

You can cancel a copy job while it is waiting to be processed, or during printing.
NOTE
To use this function, <CHECKING THE LOG> in the <SYSTEM SETTINGS> menu has
to be set to 'ON'. For details, see Chapter 6, "System Manager Settings," in the
Reference Guide.
1
2
1-20
Canceling a Copy Job
● If you press
[Stop] after printing has started:
CANCEL COPYING?
< YES
❑
Press [ ] to select 'YES'.
If you do not want to cancel the job, press [
You cannot select multiple jobs and cancel them all at once. Select and
cancel one job at a time.
The copy job currently being printed is canceled. If there is any reserved copy
job, it will start printing.
NOTE
•
If you press [Stop] after priting has started, some sheets of blank paper may be
output.
•
To cancel all settings and return the machine to the Standby display, press
[Reset].
Press [System Monitor].
COPY STATUS
SELECT JOB TO CANCEL
Make sure that <COPY STATUS> is displayed in the first line of
the LCD display ➞ press [OK].
If <COPY STATUS> is not displayed, press [
appears ➞ press [OK].
NO >
] to select 'NO'.
] or [ ] until <COPY STATUS>