Canon IR2020 Copying Manual page 23

NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass (by the
arrow in the top left corner), your original may not be scanned correctly, depending on the
copy mode that you have set.
•
A4 and A5 originals can be placed either vertically or horizontally. However, the scanning
speed for horizontally placed originals is somewhat slower than that for vertically placed
originals. Place originals horizontally when printing with a preset zoom, such as when
enlarging an A4 original onto A3 paper.
1
•
Horizontally placed A4 and A5 originals are referred to as A4R and A5R.
•
A3 originals must be placed horizontally.
•
When <AUTO COLLATE> is set to 'COLLATE' or 'STAPLE', the Collate (Offset Collate
with the optional finisher attached) or Staple mode is automatically set when you place
the originals into the feeder. (See "Auto Collate," on p. 3-15.)
•
To get the same output orientation as when the original is placed on the platen glass,
place the original upside down and face up. However, when using the Staple mode, the
machine rotates the output automatically.
1-12
Placing Originals