Canon IR2020 Copying Manual page 68

5
Press [ ] or [
center of the bound original ➞ press [OK].
ERASE WIDTH CNTR
¨
The Standby display appears, and an asterisk (*) appears on the LCD display
indicating that the Book Frame Erase mode is set.
NOTE
•
You can set the frame erase width for the center of the bound original in the range
from 1 mm to 50 mm (1/16" to 1 15/16").
•
The default setting is 10 mm (3/8").
•
If you are using the numeric keys to enter the value, be sure to enter a leading zero
to specify one-digit value. (e.g., If you want to specify "4 mm," enter as "04 mm.")
6
Press - [numeric keys] to enter the desired copy
0 9
quantity (1 to 99).
100% * AUTO A4
A TEXT
NOTE
•
For more information about entering the copy quantity, see "Specifying the
Required Number of Copies," on p. 1-24.
•
The paper size is displayed according to the original size you have selected in
step 3.
7
Press [Start].
Copying starts.
NOTE
•
To cancel all settings and return the machine to the Standby display, press
[Reset].
•
To cancel copy jobs, see "Canceling a Copy Job," on p. 1-19.
] to set the frame erase width for the
10mm
O5
2-11
Frame Erase
2