1
1-18
Placing Originals
IMPORTANT
•
Do not add or remove originals while they are being scanned.
•
When scanning is complete, remove the originals from the original output area to
avoid paper jams.
NOTE
•
The scanned originals are output to the original output area in the order that they
are fed into the feeder.
•
When you are enlarging an A4 or A5 original onto A3 paper, place the original
horizontally.
•
You can place different size originals together into the feeder if you set the Different
Size Originals mode. (See "Different Size Originals," on p. 2-18.)
Original
Output Area