Canon IR2020 Copying Manual page 76

NOTE
•
If the Different Size Originals mode is used with the 1 to 2-Sided mode and the originals
for the front and back sides of a two-sided copy are different in size, the copies are output
as one-sided copies on paper of their respective sizes.
•
You can use the stack bypass for the Auto Paper Selection when:
- The paper is loaded in the stack bypass
- The paper size is specified in <BYPASS STD SET> in the <COMMON SETTINGS>
menu
- The Auto Paper Selection is set to 'ON' for the stack bypass in <COPY> of <AUTO
DRAWER SELCT> in the <COMMON SETTINGS> menu
1
Place your originals.
100% AUTO A4
A TEXT
IMPORTANT
If your model is the iR2016, place your originals in the feeder to use the Different
Size Originals mode.
2
Press [Different Size Originals].
DIFFER. SIZE ORIG
OFF
3
Press [ ] or [
WIDTH' ➞ press [OK].
DIFFER. SIZE ORIG
SAME WIDTH
An asterisk (*) appears on the LCD display indicating that the Different Size
Originals mode is set.
O1
] to select 'SAME WIDTH' or 'DIFFERENT
Different Size Originals
2
2-19