Canon IR2020 Copying Manual page 79

IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as A4R and
A5R, horizontally. If these originals are placed vertically, the back side of the original is
copied upside down.
NOTE
•
If there is an odd number of originals, the back side of the last copy is left blank. (The
machine's counter does not count the blank page as a copy.)
•
If the 1 to 2-Sided mode is used in the Different Size Originals mode, the copies of
different size originals will be printed as one-sided copies on paper of their respective
2
sizes. If you want to make two-sided copies with different size originals, you must select
the paper size beforehand. (See "Manual Paper Selection," on p. 1-28.)
•
If the 1 to 2-Sided mode is used when the 2 on 1 Combination mode is set to 'ON', two
pages of the originals are printed on one side of the paper, and another two pages on the
other side.
1
2
3
2-22
Two-Sided Copying
Place your originals.
Press [Two-Sided].
TWO-SIDED
OFF
Press [ ] or [
[OK].
TWO-SIDED
¥
1 > 2-SIDED
] until '1 > 2-SIDED' appears ➞ press