Platen Glass - Canon IR2020 Copying Manual

Platen Glass

Place the originals on the platen glass when scanning bound originals (such as
books and magazines), originals on heavy or lightweight paper, and
transparencies.
NOTE
If you place your originals on the platen glass of the iR2016 model, the machine cannot
detect the originals size. You should select the paper size for the copies manually. (See
"Manual Paper Selection," on p. 1-28.)
1
Lift the feeder/platen cover.
IMPORTANT
The machine is equipped with an open/close sensor on the feeder/platen cover.
(see the circled area in the above illustration). When placing originals on the platen
glass, lift the feeder/platen cover high enough so that the open/close sensor
underneath is fully released. Otherwise, the machine may not correctly detect the
size of the originals. (Only the iR2020 model can detect the size of the original
placed on the platen glass.)
Sensor
1-13
Placing Originals
1