Canon IR2020 Copying Manual page 95

Hide thumbs Also See for IR2020:
Table of Contents

Advertisement

4
5
Auto Orientation
3
If <AUTO ORIENTATION> is set to 'ON', the machine uses information, such as the
size of the original and the copy ratio, to determine the most suitable orientation for
the specified paper size and then automatically rotates the image, if necessary.
NOTE
The default setting is 'ON'.
If A4 or A5 originals are enlarged onto A3 paper, Auto Orientation is not performed even
if you select 'ON'.
Only the images of standard size originals, up to A4 paper, can be rotated when the copy
ratio is set to 100%.
If Auto Paper Selection is set and the most suitable paper size is not available, the paper
source that is loaded with paper of the same size, even if the orientation is different, is
displayed as the optimal paper to use.
3-6
Specifying Copy Settings
Press [
] or [
IMAGE DIR PRIORTY
The selected mode is set, and the LCD display returns to the <COPY
SETTINGS> menu.
Press
[Stop] to return to the Standby display.
] to select 'OFF' or 'ON' ➞ press [OK].
OFF

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir2016

Table of Contents