Flow of Copy Operations
This section describes the flow of basic copy operations.
1
NOTE
•
For the following items, see the Reference Guide:
- Main power and control panel power switch
- Routine maintenance
•
Output quality may deteriorate if the platen glass is dirty. Always keep the platen glass
clean.
•
Do not touch the feeder or platen cover while copying. Rocking the feeder or cover can
distort the image being copied.
1
1-4
Flow of Copy Operations
Place your original face-up in the feeder (when attached) or
face-down on the platen glass.
NOTE
For details about placing the originals, see "Placing Originals," on p. 1-10.
● If the message <ENTER DEPT.ID> appears:
❑
Enter the Department ID and Password.
ENTER DEPT.ID
NOTE
For instructions on using Department ID Management, see Chapter 6, "System
Manager Settings," in the Reference Guide.