NOTE
•
If there is no paper in the paper source that you have selected, a message
prompting you to load the paper of the appropriate size appears on the LCD
display. You cannot start copying until you load the paper or change the paper
selection.
•
The paper sizes are displayed in the order in which they are loaded in the paper
drawers.
•
The suffix <R> (such as in A4R), used in paper size designations, indicates that the
paper is loaded in a paper drawer or the stack bypass horizontally.
•
If you have not specified the paper size and type for the stack bypass using the
Additional Functions menu, a message prompting you to specify them appears on
the LCD display when you select the stack bypass as the paper source. (See
Chapter 5, "Customizing Settings," in the Reference Guide.)
3
Press
[Start].
Copying starts.
NOTE
To cancel all settings and return the machine to the Standby display, press
[Reset].
1-29
Paper Selection
1