To 1-Sided - Canon IR2020 Copying Manual

2 to 1-Sided

This mode automatically turns over two-sided originals to make one-sided copies
on different sheets of paper.
IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as A4R and
A5R, horizontally. If these originals are placed vertically, the back side of the copy is
copied upside down.
NOTE
If the feeder is attached, it is recommended that you set the originals in the feeder when
copying in 2 to1-Sided mode. This enables you to automatically scan the front and back
sides of the originals without the need to turn over and re-feed the originals.
1
Place your originals ➞ press
If necessary, see the screen shot in step 2 of "1 to 2-Sided," on p. 2-21.
2
Press [
[OK].
TWO-SIDED
¤
Original
] until '2 > 1-SIDED' appears ➞ press
] or [
2 > 1-SIDED
Copies
[Two-Sided].
Two-Sided Copying
2
2-27