Figure 6-3 Sample Ip Addresses For A Tcpi/Ip Lan-To-Lan Connection; Table 6-1 Tcp/Ip Related Fields In Remote Node Profile - ZyXEL Communications Prestige 100IH User Manual

P100IH ISDN Router

Figure 6-3 Sample IP Addresses for a TCPI/IP LAN-to-LAN Connection

To configure the TCP/IP parameters of a remote node, first configure the two fields in Menu 11 – Remote
Node Profile, as shown in the table below.

Table 6-1 TCP/IP related fields in Remote Node Profile

Field Description
Rem IP Address Enter the IP address of the remote gateway in Menu 11.1 -
Remote Node Profile. You must fill in either the remote
Prestige WAN IP address or the remote Prestige LAN IP
address. This depends on the remote router's WAN IP i.e., for
the (remote) Prestige, the My WAN Addr settings in Menu 4.
For example (see
172.16.0.2 (the remote router's WAN IP), then you should
enter 172.16.0.2 in the Rem IP Address field. If the remote
WAN IP is 0.0.0.0, then enter 192.168.1.1(the remote router's
LAN IP) in the Rem IP Address field).
Edit IP Press the space bar to select Yes and press Enter to go to
Menu 11.3 - Remote Node Network Layer Options menu.
The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer
Options.
Remote Node TCP/IP Configuration
Figure 6-3
), if the remote WAN IP is set to
Option
Yes
(Yes/No)
6-3