Figure 4-10 Editing The First Rule In A Set - ZyXEL Communications Prestige 100IH User Manual

P100IH ISDN Router
Field
one will be advanced one rule. Save Set means to
save the whole set (note when you choose this action,
the Select Rule item will be disabled).
Select Rule When you choose Edit, Insert Before or Delete in the
previous field the cursor jumps to this field to allow you
to select the rule to apply the action in question.
N.B.: Save Set in the Action field means to save the whole set. You must do this if you
make any changes to the set – including deleting a rule. No changes to the set take
Be careful when ordering your rules as each rule is executed in turn beginning from
Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 -
Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global
Start/End IPs displayed in Menu 15.1.1.
Type= Many-to-One
Local IP:
Start= 0.0.0.0
End
Global IP:
Start= 0.0.0.0
End
Server Mapping Set= N/A
Press Space Bar to Toggle.
NAT
Description
place until this action is taken.
rule 1.
-
Menu 15.1.1.1 Marc - Rule 1
= 255.255.255.255
= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 4-10 Editing The First Rule in a Set

Option
1
4-11