Table of Contents
Advertisement
11.4 Backup Configuration
Option 5 from Menu 24 - System Maintenance allows you to backup the current Prestige configuration to
your workstation. Backup is highly recommended once your Prestige is functioning properly.
You must perform the backup and restore through the console port. Any serial communications program
should work fine; however, you must use XMODEM protocol to perform the download/upload.
Please note that terms "download" and "upload" are relative to the workstation. Download means to
transfer from another machine to the workstation, while upload means from your workstation to another
machine.
Step 1.
Go to Menu 24.5 (shown next).
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Step 2.
Press "Y" to indicate that you want to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications
programs should be similar. Run the HyperTerminal program.
Step 1.
Click "Transfer", then "Receive File" to display the following screen
.
Step 2.
Enter a path and name for the rom configuration file on your computer (see section 2.7 Filename
conventions) and make sure you choose the X-Modem Protocol. Then press "Receive".
Step 3.
After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
11-12
Figure 11-11 Backup Configuration
Enter where you want to place
the rom configuration file on
your computer.
Figure 11-12 HyperTerminal Screen
P100IH ISDN Router
Choose the
X-Modem
Protocol.
System Maintenance
Advertisement
Table of Contents
Troubleshooting
