Table 3-2 Tcp/Ip Ethernet Setup Menu Fields - ZyXEL Communications Prestige 100IH User Manual

Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Field Description
TCP/IP Setup
IP Enter the IP address of your Prestige in dotted decimal notation
Address
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
Press the space bar to select the RIP direction from Both/In
RIP
Direction Only/Out Only.
Version Press the space bar to select the RIP version from RIP-1/RIP-
2B/RIP-2M.
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [Esc] at any time to cancel.
3-6

Table 3-2 TCP/IP Ethernet Setup Menu Fields

P100IH ISDN Router
Example
192.168.1.1
(default)
255.255.255.0
Both
(default)
RIP-1
(default)
Internet Access