ZyXEL Communications Prestige 100IH User Manual page 114

Field Description
filter. The range of this field is 0 to 65535. This field is a
don't-care if it is 0.
Destination: Port # Select the comparison to apply to the destination port in
Comp the packet against the value given in Destination: Port #.
Source: IP Addr Enter the source IP Address of the packet you wish to
filter. This field is a don't-care if it is 0.0.0.0.
Source: IP Mask Enter the IP subnet mask to apply to the Source: IP Addr.
Source: Port # Enter the source port of the packets that you wish to filter.
The range of this field is 0 to 65535. This field is a don't-
care if it is 0.
Source: Port # Select the comparison to apply to the source port in the
Comp packet against the value given in Source: Port #.
TCP Estab This field is applicable only when IP Protocol field is 6,
TCP. If yes, the rule matches only established TCP
connections; else the rule matches all TCP packets.
More If yes, a matching packet is passed to the next filter rule
before an action is taken; else the packet is disposed of
according to the action fields.
If More is Yes, then Action Matched and Action Not
Matched will be N/A.
Log Select the logging option from the following:
Action Matched Select the action for a matching packet.
Action Not Matched Select the action for a packet not matching the rule.
9-10
None – No packets will be logged.
Action Matched - Only packets that match the rule
parameters will be logged.
Action Not Matched - Only packets that do not
match the rule parameters will be logged.
Both – All packets will be logged.
P100IH ISDN Router
Option
None/Less/Greater/
Equal/Not Equal
IP Address
IP Mask
0-65535
None/Less/Greater/
Equal/Not Equal
Yes/No
Yes / N/A
None
Action Matched
Action Not Matched
Both
Check Next Rule
Forward
Drop
Check Next Rule
Filter Configuration