Remote Access Server; Figure 7-1 Example Of Telecommuting Lan-To-Lan Server Application - ZyXEL Communications Prestige 100IH User Manual

P100IH ISDN Router
7.1

Remote Access Server

Telecommuting enables people to work at remote sites and yet still have access to the resources in the
business office. Typically, a telecommuter will use a client workstation with TCP/IP and dial-out
capabilities, e.g., a Windows PC or a Macintosh. For telecommuters to call in to your Prestige, you need to
configure a dial-in user profile for each telecommuter. Additionally, you need to configure the Default Dial-
In Setup to set the operational parameters for all dial-in users.
An example of remote access server for telecommuters is shown in

Figure 7-1 Example of Telecommuting LAN-to-LAN Server Application

Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide access for the
workstations on a remote network. For your Prestige to be set up as a LAN-to-LAN server, you need to
configure the Default Dial-In Setup to set the operational parameters for incoming calls. Additionally, you
must create a remote node for the router on the remote network (see Chapter 5: ).
An example of your Prestige being used as a LAN-to-LAN server is shown next.
7-2 Dial-In Server Configuration